I HAVE MY ELECTROCULTURE 100% COPPER COIL ANTENNA, YAY! (Now what do I do with the thing!)

Anyone who watches Hill’s Mill Homestead channel on YouTube knows that Mickey is a firm believer in Electroculture and practices several methods of Electroculture in the terrace gardens, raised beds, container gardens, and orchards at the Mill.

Pepper plant
Pontiac Red potatoes

You may have recently purchased an Electroculture 100% Copper Coil Antenna from our website and it has now arrived and you think to yourself, now how do I get the best performance from my antenna?

At first glance you will look at the coil and immediately think…hmmm….I remember something being said about the antenna should stand clockwise in the soil if I am in the Northern Hemisphere, but boy, Mickey must have been working overtime when he handmade my coil because this thing looks like it is running counterclockwise! Well friend, I said the same thing when I saw what appeared that he was engineering them backwards but NO!!! Mickey doesn’t do anything half way or without careful thought and consideration. Each Electroculture 100% Copper Coil Antenna is handmade with the upmost attention to detail. (thus leaving me to grovel at my mistaken view of the antenna, LOL!) If you will hold the antenna up over your head, peering into the center of the spiral, you will see the clockwise precision of the coil. Also, if you look downward into the spiral of the coil, you again will see that, in point of fact, the coil is running clockwise.

So now that we have established, that indeed, your Electroculture Copper Coil Antenna is running clockwise, you will find that each antenna has a short and long end. The short end should be downward as you insert the coil into the soil 2-4″ deep. That’s all you have to do.

At initial installation, the antenna should be placed far enough from the plant that the foliage does not touch it. Once your plant starts growing the growth will touch the antenna and that is okay, just not when the copper is exposed to the sun creating a hot spot that can damage your leaves.

We recommend for optimum performance that you place the antenna short end down, on the SOUTH side of the plant. How do I establish North and South? If you have a smart phone, there are many directional compass apps that you can download to establish North. You can also remember the sun rises in the East and sets in the West. Now that you have established North, place the antenna on the opposite side of the plant, which is the South side, placing the plant between magnetic North and the Electroculture 100% Copper Coil Antenna.

You are ready now to begin experiencing the antenna method, one of several methods of Electroculture, in your own growing medium, whether that be garden soil, patio containers, greenhouse, or indoor plants.


Mickey and Kathy -Hill’s Mill

Watch our latest videos on Electroculture Gardening at Hill’s Mill Homestead on YouTube or stay updated on recent posts at our website http://www.HillsMill.com.

TO MAKE A DONATION TO HILLS MILL HOMESTEAD, FOLLOW THIS LINK. https://www.paypal.com/donate/?hosted_button_id=T8FVXYQM2J8JE

Wisdom in the WORD

Recently, Mickey and I became extremely aware of the Biblical principle in tything. In our most recent tythe, God opened the windows of Heaven and poured out a blessing that can not be contained in a great big huge basket. It’s not as much about the monetary value, as it has been about the wealth of friendship and camaraderie that has filled our cup to overflowing as we receive the kindest shouts of encouragement, support, and helping hands from those all across this great Nation of ours (and around the world). It overwhelms us with emotion when we stop to think of the reality of the magnitude of it all.

We have been working day and night filling Electroculture antenna orders, all the while continuing the day to day operations of the sawmill business and a full time job. We are grateful to all of our YouTube friends who have poured out their love on us in supporting our endeavor to introduce and educate homesteaders and gardeners on the wonderful benefits that can be achieved with the various methods of ELECTROCULTURE.


We want all of you to know, who are wondering about your order, it is currently taking about 4-7 days from the point where Mickey is manufacturing your antenna, each one by hand, with his maticulus attention to detail, to delivery to your mailbox via the United States Postal Service. We have been met with opposition with supply chains and e-commerce and website challenges but God willing we are pushing through. Thank you for your kind patience. WE ARE LITERALLY WORKING DAY AND NIGHT TO GET THE PRODUCT MICKEY IS SO PROUD OF TO YOU.


If you have visited our YouTube channel, Hill’s Mill Homestead, you will have heard the word ELECTROCULTURE in some of our videos. Mickey began his exploration of the various methods of Electroculture in his younger years, when he happened upon a book that he found in his grandmother’s bookshelf in the early 1970s. The title of the book was BEST IDEAS FOR ORGANIC VEGETABLE GROWING (Rodale Books, Inc. 1969)and it was written by the editors of ORGANIC GARDENING magazine.

Mickey has been practicing ELECTROCULTURE ever since the reading of what impressed him as an outstanding science project that worked out to grow his vegetables so impressively that he gained the title “greenerthumbs” by those who knew him and knew of his growing ability.

Mickey has always had impressive gardens and he was encouraged by other YouTubers, like Deep South Homestead, to share what knowledge he has with family, neighbors, and friends, as well as upcoming generations in an alternative organic way to harness the electro/magnetic currents available in nature to increase yields and productivity applicable in the agriculture/horticulture setting.

To describe ELECTROCULTURE in a general term would mean to cultivate fruit/vegetables/trees/apiculture, or any agriculture/horticulture product that can be harvested, using electric currents and magnetic currents from the aether and direct it to soil or growing medium to improve the health, and increase yields of said culture item.

The applications of the methods of Electroculture are endless possibilities, all waiting to be explored by science genius and layman alike. There are a plethora of methods of Electroculture such as using copper coil antennas placed in growing medium including raised garden beds, container gardens and potted plants; to taller antennas used to cover more territory such as orchards and larger growing areas. In addition, there are ways of connecting wire to harness energy after electrical storms and also ways to use magnet disks to utilize the electromagnetic energy. There are literally dozens of ways to practice ELECTROCULTURE, even using frequencies inside of seashells!!

ELECTROCULTURE IS NOT A NEW CONCEPT! Electroculture dates back to the days of the pyramids and was first written about in detail in the mid-1700s.

There are nay sayers out there that just don’t believe in Electroculture either because they have never heard of it or have never tried it in their own gardens or ag/hort settings. But Mickey just can’t give up what he has used for decades and has seen the success that using Electroculture has been in his gardens and growing medium over the years. Let’s just put it this way, you will never convince us otherwise and we will never have a garden, orchard, raised bed or container garden without some form of Electroculture near by.

Give it a try yourself, you have nothing to lose by adding a simple 12″ copper coil antenna in your own growing medium. We feel confident it will change your way of thinking about Electroculture.


Hills Mill Homestead Channel

Welcome to Hill’s Mill Homestead channel. Hill’s Mill is a second generation, locally owned and family operated ‘wood workers” sawmill and homestead located just outside of Nashville, Tennessee. Mickey Hill, a veteran of the US Marine Corps, caters to high end master craftsman and wood artist (new enthusiast as well as seasoned professionals), with stock and special order quality wood products in a variety of native species. At Hill’s Mill, we pay close attention to detail in the grain and character of every log we saw, by studying unique structures of logs, reading every log to capture any unique qualities and character of each log, hewning edges to perfection and paying extreme attention to detail. We specialize in live edge slabs, heirloom quality lumber, turning blanks, table legs, mantles and custom designed and unique pieces. Mickey has more than 40 years experience in fine carpentry and has started this YouTube Channel to share his knowledge and expertise with our audience, hoping to keep alive a craft that is rarely seen in current times, so that future generations can learn from Mickey and keep the craft alive.
The Homestead portion of the channel will be dedicated to sharing knowledge and experience with our audience in the areas of electroculture gardening, permaculture gardening with organic practices, container and raised bed gardening, fruit orchard maintenance, and basic care of small livestock, mixed in with a whole lot of fun.

youtube channel url: https://www.youtube.com/channel/UCflt6vD6DoZqDNOtI-wYEAw
Hills Mill website url: https://hillsmill.com
facebook url: https://www.facebook.com/hillssawmill
instagram: https://www.instagram.com/hills2mill/

Powered by WordPress.com.

Up ↑